===== npreal2.spec =====

<file>
# This is a  spec file for the MOXA Linux Real TTY Driver

%define kernel 		2.6.18-194.8.1.el5
%define _topdir	 	/root/moxa-rpm
%define name		npreal2 
%define release		2.6.18_194.8.1.el5
%define version 	1.16
%define buildroot 	%{_topdir}/%{name}-%{version}-root
%define NPPATH		/usr/lib/npreal2
%define driverPath	%{NPPATH}/driver
%define Moxa_config	%{driverPath}/npreal2d.cf
%define MXLOADSVR	%{driverPath}/mxloadsvr

BuildRoot:		%{buildroot}
Summary: 		MOXA Linux Real TTY Driver
License: 		Unknown
Packager:		Thomas Ubuntu Dahlmann <tdd at dubex dot dk>
Name: 			%{name}
Version: 		%{version}
Release: 		%{release}
Source: 		%{name}-%{version}.tar.gz
Prefix: 		/usr
Group: 			System/Utilities

%description
The purpose of this driver is to map NPort serial port to host tty port. Using this driver, you can use NPort serial port as local tty port.

%prep
%setup -q
rm -rf %{buildroot}
mkdir -p %{buildroot}


%build
NPPATH="/usr/lib/npreal2"
driverPath="/usr/lib/npreal2/driver"
make SP1 PATH1=$(pwd)

%install

NowPath=$(pwd)
mkdir -p %{buildroot}/%{driverPath}
mkdir -p %{buildroot}/%{NPPATH}
mkdir -p %{buildroot}/lib/modules/%{kernel}/kernel/drivers/char/
mkdir -p %{buildroot}/lib/modules/%{kernel}/misc
mkdir -p %{buildroot}/etc

cp -f $NowPath/killp %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2d   %{buildroot}/%{driverPath}
cp -f $NowPath/Makefile    %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2d.c  %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2.h  %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2d.cf %{buildroot}/%{driverPath}/config
cp -f $NowPath/npreal2d.cf %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2.c   %{buildroot}/%{driverPath}
cp -f $NowPath/mxaddsvr    %{buildroot}/%{driverPath}
cp -f $NowPath/mxdelsvr    %{buildroot}/%{driverPath}
cp -f $NowPath/mxcfmat     %{buildroot}/%{driverPath}
cp -f $NowPath/mxloadsvr   %{buildroot}/%{driverPath}
cp -f $NowPath/mxmknod     %{buildroot}/%{driverPath}
cp -f $NowPath/mxrmnod     %{buildroot}/%{driverPath}
cp -f $NowPath/mxuninst    %{buildroot}/%{driverPath}
cp -f $NowPath/mxsetsec    %{buildroot}/%{driverPath}
cp -f $NowPath/README.TXT  %{buildroot}/%{NPPATH}
cp -f $NowPath/VERSION.TXT %{buildroot}/%{NPPATH}
cp -f $NowPath/kernel2.6.txt %{buildroot}/%{NPPATH}
cp -f $NowPath/npreal2.ko	%{buildroot}/lib/modules/%{kernel}/kernel/drivers/char
cp -f $NowPath/npreal2.ko	%{buildroot}/lib/modules/%{kernel}/misc
# Refresh modules
depmod -a

%post

if [ -f /usr/lib/npreal2/driver/npreal2d.cf ]
then
    echo "Backup old config file.."
    cp %{Moxa_config} /root/npreal2d.cf-$(date +%d%m%y-%H%M)
    echo "OK!"
fi

%preun
cd %{driverPath}
for moxabox in $(cat %{driverPath}/npreal2d.cf | grep -v \# | egrep '^([0-9])'| awk '{print $2}'); do
    ./mxdelsvr $moxabox
done 
%postun
cat /etc/rc.d/rc.local |grep -v "modprobe npreal2" > /tmp/rc.local
cat /tmp/rc.local > /etc/rc.d/rc.local
rm /tmp/rc.local

%files
%defattr(-,root,root)

/lib/modules/%{kernel}/kernel/drivers/char/npreal2.ko
/lib/modules/%{kernel}/misc/npreal2.ko
%{driverPath}/killp       
%{driverPath}/npreal2d    
%{driverPath}/Makefile    
%{driverPath}/npreal2d.c  
%{driverPath}/npreal2.h  
%{driverPath}/npreal2d.cf
%{driverPath}/config
%{driverPath}/npreal2.c   
%{driverPath}/mxaddsvr    
%{driverPath}/mxdelsvr    
%{driverPath}/mxcfmat     
%{driverPath}/mxloadsvr   
%{driverPath}/mxmknod     
%{driverPath}/mxrmnod     
%{driverPath}/mxuninst    
%{driverPath}/mxsetsec    
%{NPPATH}/README.TXT  
%{NPPATH}/VERSION.TXT 
%{NPPATH}/kernel2.6.txt 
</file>







===== OLD npreal2.spec =====

<file>
# This is a  spec file for the MOXA Linux Real TTY Driver
%define kernel 2.6.18-164.11.1.el5
%define _topdir	 	/root/moxa-rpm
%define name		npreal2 
%define release		1
%define version 	1.16
%define buildroot %{_topdir}/%{name}-%{version}-root
%define NPPATH	/usr/lib/npreal2
%define driverPath	/usr/lib/npreal2/driver

BuildRoot:		%{buildroot}
Summary: 		MOXA Linux Real TTY Driver
License: 		Unknown
Packager:		Thomas Ubuntu Dahlmann <tdd at dubex dot dk>
Name: 			%{name}
Version: 		%{version}
Release: 		%{release}
Source: 		%{name}-%{version}.tar.gz
Prefix: 		/usr
Group: 			System/Utilities

%description
The purpose of this driver is to map NPort serial port to host tty port. Using this driver, you can use NPort serial port as local tty port.

%prep
%setup -q
rm -rf %{buildroot}
mkdir %{buildroot}


%build
NPPATH="/usr/lib/npreal2"
driverPath="/usr/lib/npreal2/driver"
make SP1 PATH1=$(pwd)

%install

NowPath=$(pwd)
mkdir -p %{buildroot}/%{driverPath}
mkdir -p %{buildroot}/%{NPPATH}
mkdir -p %{buildroot}/lib/modules/%{kernel}/kernel/drivers/char/
mkdir -p %{buildroot}/lib/modules/%{kernel}/misc
mkdir -p %{buildroot}/etc

cp -f $NowPath/killp %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2d   %{buildroot}/%{driverPath}
cp -f $NowPath/Makefile    %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2d.c  %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2.h  %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2d.cf %{buildroot}/%{driverPath}/config
cp -f $NowPath/npreal2d.cf %{buildroot}/%{driverPath}
cp -f $NowPath/npreal2.c   %{buildroot}/%{driverPath}
cp -f $NowPath/mxaddsvr    %{buildroot}/%{driverPath}
cp -f $NowPath/mxdelsvr    %{buildroot}/%{driverPath}
cp -f $NowPath/mxcfmat     %{buildroot}/%{driverPath}
cp -f $NowPath/mxloadsvr   %{buildroot}/%{driverPath}
cp -f $NowPath/mxmknod     %{buildroot}/%{driverPath}
cp -f $NowPath/mxrmnod     %{buildroot}/%{driverPath}
cp -f $NowPath/mxuninst    %{buildroot}/%{driverPath}
cp -f $NowPath/mxsetsec    %{buildroot}/%{driverPath}
cp -f $NowPath/README.TXT  %{buildroot}/%{NPPATH}
cp -f $NowPath/VERSION.TXT %{buildroot}/%{NPPATH}
cp -f $NowPath/kernel2.6.txt %{buildroot}/%{NPPATH}
cp -f $NowPath/npreal2.ko	%{buildroot}/lib/modules/%{kernel}/kernel/drivers/char
cp -f $NowPath/npreal2.ko	%{buildroot}/lib/modules/%{kernel}/misc

%post
function error_occured {
    echo "                                                                                  
    ERROR OCCURRED!!                                                                    
    The driver could not be loaded.                                                     
    Your kernel version is:    `uname -r`                                               
    This package is build for: %{kernel}                                      
    Last 10 lines from kernel output:                                                    
    -------------------------------------                                               
    " 
    dmesg|tail -n 10
    exit
}

if [ -f /usr/lib/npreal2/driver/npreal2d.cf ]
then
    kill -9 `ps aux|grep npreal2d|awk '{print $2}'`  > /dev/null 2>&1
    lsmod | grep npreal2 | awk '$0 != "" {system("modprobe -r npreal2")}'
    if [ $? -eq 0 ]
    then
        modprobe npreal2
        depmod -a
    else
	error_occured
    fi
    if [ $? -eq 0 ]
    then
        echo "Driver loaded OK!"
	exit 0
     else
        error_occured
     fi
	     
else
    echo "
    ===============================================================================
    Installation process is completed.
    The driver files are installed in /usr/lib/npreal2/driver.
    Now you can "cd /usr/lib/npreal2/driver" and run "./mxaddsvr" to add tty port.
    ===============================================================================
    "
fi

%preun
cd %{driverPath}
for moxabox in $(cat %{driverPath}/npreal2d.cf | grep -v \# | egrep '^([0-9])'| awk '{print $2}'); do
    ./mxdelsvr $moxabox
done 
%postun
cat /etc/rc.d/rc.local |grep -v "modprobe npreal2" > /tmp/rc.local
cat /tmp/rc.local > /etc/rc.d/rc.local
rm /tmp/rc.local

%files
%defattr(-,root,root)

/lib/modules/%{kernel}/kernel/drivers/char/npreal2.ko
/lib/modules/%{kernel}/misc/npreal2.ko
%{driverPath}/killp       
%{driverPath}/npreal2d    
%{driverPath}/Makefile    
%{driverPath}/npreal2d.c  
%{driverPath}/npreal2.h  
%{driverPath}/npreal2d.cf
%{driverPath}/config
%{driverPath}/npreal2.c   
%{driverPath}/mxaddsvr    
%{driverPath}/mxdelsvr    
%{driverPath}/mxcfmat     
%{driverPath}/mxloadsvr   
%{driverPath}/mxmknod     
%{driverPath}/mxrmnod     
%{driverPath}/mxuninst    
%{driverPath}/mxsetsec    
%{NPPATH}/README.TXT  
%{NPPATH}/VERSION.TXT 
%{NPPATH}/kernel2.6.txt 
</file>